Description
- Product Features
- Specifications
- Downloads
Victron Phoenix Smart IP43 12/30 (1+1) 230V Battery Charger PSC123051085, 5 Year Warranty. With boat owners in mind this adaptive 5-step charger can provide either 30A or 50A of charge to each of three battery banks. Or the Phoenix 1+1 model provides 3A to the starter-battery, the rest to the ‘house’ bank. 24V models are available with 16A/25A charge. Bluetooth enabled, you can monitor the charger and set alarms straight from your phone. Adaptive, intelligent, dynamic charge features – see the datasheet below.
Bluetooth Smart enabled
Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available.
Phoenix Smart (1+1): two outputs to charge 2 battery banks
The second output, limited to approximately 3A and with a slightly lower output voltage, is intended to top up a starter battery.
Phoenix Smart (3): three full current outputs to charge 3 battery banks
Each output can supply the full rated output current. But the total of the 3 outputs combined can never exceed the current rating of the charger.
Automatic voltage compensation
The charger compensates for voltage drop over the DC cabling by slightly increasing output voltage when the DC current increases. Please see the manual for details.
Adaptive 5-stage charge algorithm: bulk – absorption – recondition – float – storage
The Phoenix Smart Charger features our well-known ‘adaptive’ battery management system that can be preset to suit different types of batteries. The ‘adaptive’ feature will automatically optimise the charge process relative to the way the battery is being used.
The right amount of charge: variable absorption time
When only shallow discharges occur (a yacht connected to shore power for example) the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery will be fully charged.
Preventing damage due to excessive gassing: the BatterySafe mode
If, in order to quickly charge a battery, a high charge current in combination with a high absorption voltage has been chosen, the charger will prevent damage due to excessive gassing by automatically limiting the rate of voltage increase once the gassing voltage has been reached
Less maintenance and aging when the battery is not in use: the Storage Mode
The Storage Mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the Storage Mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.
Also charges Li-ion (LiFePO₄) batteries
Charger on-off control can be implemented by connecting a relay or open collector optocoupler output from a Li-ion BMS to the remote on-off port.
Alternatively full control of voltage and current can be achieved with Bluetooth.
Fully programmable charge algorithm
The charge algorithm can be programmed with help of Bluetooth or the VE.Direct interface.
Three preprogrammed algorithms can be selected with the mode button (see specifications).
Remote on-off
The remote on/off consists of two terminals: Remote H and Remote L.
A remote on/off switch or relay contact can be connected between H and L.
Alternatively, terminal H can be pulled high, or terminal L can be pulled low.
See manual for details.
VE.Direct interface
For a wired data connection to a Color Control panel, PC or other devices.
Please see the VictronConnect app under Downloads / Software on our website.
Programmable relay
Can be programmed using the VE.Direct interface or a Bluetooth enabled device
to trip on an alarm or other events.
Learn more about batteries and battery charging
For more information about adaptive charging please look under Downloads / White papers on our
website.
| SKU | PSC123051085 |
|---|---|
| Barcode | 8719076041900 |
| Brands | Victron |
| Model | PSC123051085 |
| Output Current Rating (Amps) | 30.0 Amps |
| Efficiency | 94% |
| Operating Temperature Range | -20 to 60°C (0 - 140°F) |
| AC Input Connection | IEC 320 C14 inlet with retainer clip (AC cord with country specific plug must be ordered separately) |
| Humidity | Max 95% |
| Output System Voltage | 12V |
| Charge current | 30 A |
| Dimensions | 180 x 249 x 100 mm (L x W x H) |
| Net Weight (kg) | 3.5 Kg |
| Charge Algorithm | 5 stage adaptive |
| Charge voltage 'absorption' | Normal: 14,4V High: 14,7V Li-ion: 14,2V |
| Charge Voltage Float - Wet (25 degrees)** | Normal: 13,8V High: 13,8V Li-ion: 13,5V |
| Charge voltage 'storage' | Normal: 13,2V High: 13,2V Li-ion: 13,5V |
| Protection category | IP43 (electronic components), IP22 (connection area) |
| Battery-connection | Screw terminals 16 mm² (AWG6) |
| Input Voltage | 230 VAC (range: 210 – 250 V |
| Manufacturers Warranty | 5 Years |
Estimate shipping
Refund Policy
While we fully stand by every product that we sell, we understand that sometimes you might change your mind or realize the product you ordered wasn't exactly what you were hoping for.
That's why we offer a 30 Day Return Policy.
If you decide you want to return an item for any reason within 30 days after receipt of your order, please email us at support@hbplus.com.au with your order number and we will provide detailed instructions on how to process the return.
Please note, you as the customer will be responsible for paying the return shipping costs of the item(s) in your order.
Once your return item(s) have been received and inspected at our warehouse(s), we will send you an email notification that we have processed your return payment.
*Please note: In order to receive a refund for the item(s) ordered, the item(s) must arrive back to our distribution center in "Like New" condition and must contain all original packaging and accessories.
"Like New" means that the items you ordered must not show any visual signs of wear.
If items are returned with visual signs of wear, or have any issues due to use will not be accepted and no refund will be given.
If you decide you want to return your order, please email us at support@hbplus.com.au with your order number and we will assist you. We want to make this as simple of a process as possible for you.
Damages
If the product is damaged, you must make note of it immediately when signing for delivery and send photos to support@hbplus.com.au the day of delivery.
Off Grid Direct will pay for shipping defective, damaged, or incorrect merchandise at our cost.
Remember to keep all the original packaging for any items that need to be returned. All returns need to be authorized by our customer service department prior to being processed.
We will ensure you get the product you ordered, undamaged, as soon as possible. Items that become damaged after use are non-refundable unless specified under warranty.
Cancellations
If you would like to cancel an order, please email or call our customer service team immediately to avoid return shipping fees.
Cancellations received before shipment will receive a full refund.
Orders cancelled after items have shipped will follow our 30 Day Return policy and will be subject to return shipping costs.
Other Return Policy Notes:
- If a certain vendor or product does not support the return policy stated above, this will be noted in the product descriptions or in the product-specific return information.
- Products that are specified as certified pre-owned or used are ineligible for a return
- Off Grid Direct only sells to purchasers who intend to use the item(s) for the duration of its economic life. Orders purchased for the specific purpose of a "one time use or temporary use" are not eligible for return under any circumstances. This includes but is not limited to; orders intended for use in a trade show or a conference venue, orders that are purchased by promotional companies, and orders that are purchased by trade show facilitators.
For more information on Shipping & Returns see our FAQ page.